• Derecelendirme: 0/5 - 0 oy
  • 1
  • 2
  • 3
  • 4
  • 5
Smart Motor Valve is a control valve with a microprocessor that can realize intelligent control functions.

Screw Valve utilizes a screw or an auger to turn fluid down a cylinder. The rotation of the screw creates a shearing force on the fluid which forces the fluid down the threads of the screw. This technology has been around since the Egyptian times where the technology was used to move water from the Nile River.

ball valve is a flow control device which uses a hollow, perforated and pivoting ball to control liquid flowing through it. It is open when the ball's hole is in line with the flow inlet and closed when it is pivoted 90-degrees by the valve handle, blocking the flow. The handle lies flat in alignment with the flow when open, and is perpendicular to it when closed, making for easy visual confirmation of the valve's status. The shut position 1/4 turn could be in either clockwise or counter-clockwise direction.

Fast closing valve is a kind of pressure reducing valve in which the an automatic process control valve for fluid pressure control is used for unmanned machinery spaces.

Industrial valves are devices that are used to regulate liquids, gases, and slurries. The flow of liquids or gases can be controlled using these valves. This can be done through pipes and other passageways by opening, closing, and partially obstructing the passageway or pipe.

Electric Orbit Ball Valve is a type of ball valve. It employs a tilt and turn mechanism that eliminates seal rubbing.

glass connector is a type of accessory that is used for joining mirror pane or sheets together. They are a type of hinge that is commonly used for connecting panes in the construction industry. It is a significant element for a mirror door installed at home and office improvement projects.

High-Temp. Glass Connector is a device that is widely used for circuit connection between various electronic instruments, electronic equipment in sealed containers and power sources.

Valve Wires Connector Type is designed to supply power and, in some cases, signal transmission to end devices like solenoid valves by connecting them to voltage supplies and/or data networks.

The Water Meter Valve shuts off the water at the meter itself, which is typically installed when the meter is put into place. This allows water lines on both sides of the meter to remain full of water and under pressure while the meter is being serviced.

Hızlı Cevap
Bu mesaj için cevabınızı buraya yazınız.

Güvenlik Kodu:
Lütfen, resmin üzerindeki harf ve rakamlardan oluşan Güvenlik Kodunu, aşağıdaki metin kutusuna giriniz.
Güvenlik Kodu:
(Büyük/Küçük harf duyarsız)

Hızlı Menü:

Konuyu Okuyanlar: 1 Ziyaretçi