• Derecelendirme: 0/5 - 0 oy
  • 1
  • 2
  • 3
  • 4
  • 5
What is a thermostat?
What is a thermostat?
The Room Thermostat is a common fixture in most homes, helping to maintain an even temperature in the house all year round. In the winter, room thermostats (sometimes referred to as roomstats) prevent rooms from overheating. In the summer months, they ensure the heating system does not fire up unless the temperature of the house falls below a preset level.

How do thermostats work?
A thermostat is normally a control unit for a central heating boiler, but these days it can also control electric heating such as infrared panels. You choose the temperature that you would like the house to be at via a dial or a digital display on the thermostat. The thermostat then monitors the ambient temperature of the air and instructs the boiler/heating system to turn on or off accordingly.
If the temperature of the ambient air is lower than the requested temperature set on the thermostat, it will fire a message to the boiler to fire up and send hot water to the radiators to heat the house.
If the air temperature is too high, the Underfloor Heating Thermostat will send a message to the boiler to switch off, which obviously should result in the home cooling down.

Using a thermostat will therefore ensure that the house stays at a regular temperature and rooms don’t overheat. The thermostat will ensure that the boiler keeps a constant temperature in the house, which results in an efficient heating system that will save you money on your gas bills.

Thermostats are just part of heating controls
Fan Coil Thermostats are just one part of a home’s heating controls, which normally include a programmer and TRVs. They are designed to work seamlessly with the other components, with the thermostat overriding the programmer to prevent overheating. It is important that you don’t situate your roomstat near a radiator with a TRV because they will interfere with one another – that will mean the heating may go on and off unexpectedly.

New intelligent heating controls such as Nest take the idea of the thermostat much further. They allow you to set the temperature of the home from the other side of the world via your phone, but they also take into account things like direct sunlight, which in the past has manipulated the ambient air temperature.

An Underfloor Heating Controller system evenly distributes heat throughout a room and this ensures a comfortable environment, with optimal energy efficiency. What's more, you will avoid the unpleasant feeling of cold feet on a winter’s day! A radiator system on the other hand, concentrates heating in one area first before it is spread across the whole room. This make it highly inefficient and there is also the risk that heat is lost through the ceiling. According to Greenage, underfloor heating systems use 15-40% less energy than a radiator.

Paper is a highly versatile material thanks to the rich features it offers including folding, printing, and painting on its surface. So it comes as no surprise that paper increasingly enters areas no one ever thought it would, for instance, electrical engineering. However, until now a low-cost, easy to fabricate, flexible to customize, reversible, and electronically-controllable option for paper based Actuators was still missing. But over the last year, researchers from Carnegie Mellon University (CMU) didn’t only succeed in teaching a normal piece of paper touchscreen abilities and designing furniture from paper, they also managed to print an actuator on common copy paper.

Compared with the solenoid valve, the Motorized Valves are more reliable, safe and can replace the solenoid valve. In this article, we will introduce you in detail the solenoid valve and motorized valve principle of the difference and different applications.

How Motorized Valve Works:
Motorized Valve is a power supply to drive the motor rotation, thus opening or closing the valve of a device, and withstand voltage shocks. The rotating range of the electric valve is adjustable. The rotating range can be adjusted by inputting the specified current and voltage signals. The general control signals are: current signal (4 ~ 20mA, 0 ~ 10mA) or voltage signal (0 ~ 5V, 1 ~ 5V).

Hızlı Cevap
Bu mesaj için cevabınızı buraya yazınız.

Güvenlik Kodu:
Lütfen, resmin üzerindeki harf ve rakamlardan oluşan Güvenlik Kodunu, aşağıdaki metin kutusuna giriniz.
Güvenlik Kodu:
(Büyük/Küçük harf duyarsız)

Hızlı Menü:

Konuyu Okuyanlar: 1 Ziyaretçi